Thursday , 10 October 2024
Tin Mới
You are here: Home » Weintek HMI » HMI Weintek – Easyview MT8000X Series » MT8150X Màn hình cảm ứng HMI Weintek 15 Inch
MT8150X Màn hình cảm ứng HMI Weintek 15 Inch

MT8150X Màn hình cảm ứng HMI Weintek 15 Inch

MT8150X Màn hình cảm ứng HMI Weintek 15 Inch

Hardware Specification
Display 15.0″ TFT
Brightness 350 cd/m2
Color 65,536 colors
Contrast Ratio 550:1
Resolution (W x H dots) 1024 x 768
Back Light CCFLx2
CCFL Life Time 50,000 hr.
Touch Panel 4 wires resistive type
Touch Accuracy Active Area Length(X)±2%, Width(Y)±2%
Surface Hardness 4H
I/O port COM1 (RS-232/RS-485 2W/4W), COM2(RS232), COM3(RS-232/RS-485
2W),1 Ethernet port (10/100 Base-T)
USB Host 2 USB 2.0 Full Speed Host port
Audio 1 x Audio Line Out, 1 x MIC In
Processor 500MHz CPU
DRAM 256MB on board DDR-400MHz SDRAM
SD card slot Support SDHC/SD, MT8000 doesn’t support Plug and Play.
RTC Built-in (CR2032 3V lithium battery backup.)
General Specification
Input Power 24±20% VDC (Power Isolator Inside.)
Power Consumption 1.6 A@24VDC
CE Complies with EN50081-2 and EN50082-2 standards
FCC Complies with FCC Class A
Voltage Resistance 500VAC (1 min.)
Isolation Resistance Exceed 50Ω at 500VDC
Vibration Endurance 10 to 25 Hz (X,Y,Z direction 2G 30mins)
Protection Structure IP65 front panel (O ring seal)
Operating Temperature 0~45°C
Operation Humidity 10-90% RH (non –condensing)
Enclosure Aluminum
Dimensions WxHxD 366 x 293 x 55mm
Panel Cutout Dimensions 352 x 279 mm
Weight Approx. 2.9 kg
Operating System
Operating System EB8000 V1.3.0 or Newer


MT8150X-Dimension Man hinh cam ung HMI Weintek

MT8150X-Dimension Man hinh cam ung HMI Weintek

  • COM 1 [RS-232] Male 9P D-Sub
Pin# Symbol COM 1
[RS-232]
1 Not used
2 RxD Received Data
3 TxD Transmitted Data
4 Not used
5 GND Signal Ground
6 Not used
7 RTS Ready to send output
8 CTS Clear to send input
9 Not used
  • COM 1 [RS-485 2/4W], COM 3 [RS-485 2W] Female 9P D-Sub
Pin# Symbol COM 1 COM 1 COM 3
[RS-485] 2W [RS-485] 4W [RS-485] 2W
1 Rx- Data- Rx-
2 Rx+ Data+ Rx+
3 Tx- Tx-
4 Tx+ Tx+
5 GND1 Ground 1
6 Not used
7 Data- Data-
8 Data+ Data+
9 GND2 Ground 2
  • Ghi Chú: Both COM 1 [RS-485] 2W and COM 3 [RS-485] 2W support MPI 187.5K, please use one at one time.
  • Software: EB8000 

Ghi Chú: Dòng màn hình này hiện tại đã ngừng sản xuất ( This model has been discontinued)
================================

Công ty TNHH DACO – Nhà Phân Phi Màn Hình Cng HMI Weintek Easyview –  Đài Loan

Màn hình cảm ứng HMI Weintek Easyview, Màn hình cảm ứng Weintek Easyview, Màn hình HMI Weintek Easyview, Màn hình Weintek Easyview

Trụ sở: Số 146 – Tân Triều – Thanh Trì – Hà Nội
VPGD: Liền kề 9 – Vị trí 19 – Khu đô thị Xala – Hà đông – Hà Nội

Email: hungphan@dacovn.com
Handphone: 0902 189 622
Website: Màn hình cảm ứng HMI Weintek

Scroll To Top
Gọi 0936064289
Chat ZALO